Contents
vi
Cisco VG248 Analog Phone Gateway Software Configuration Guide
OL-1209-02
Identifying the Country Code for VG248 3-6
Changing the Hook Flash Timer for Analog Phones 3-7
Setting the Port Enable Policy 3-7
Configuring Port Parameters 3-9
Enabling a Specific Port 3-9
Enabling Caller ID 3-11
Choosing Message Waiting Indicator Type 3-11
Enabling Disconnect Supervision 3-12
Setting the Output Gain 3-13
Setting the Input Gain 3-14
Configuring Analog Phones Using Cisco CallManager 4-1
Overview 4-1
Adding the VG248 to Cisco CallManager 4-2
Using Auto-Registration 4-2
Manually Adding the VG248 4-3
Configuring the VG248 Analog Ports 4-3
Integrating Cisco CallManager with Voice Mail Systems Using SMDI 5-1
Overview 5-2
Choosing a Configuration Option 5-4
Basic Configuration 5-5
Chained Configuration 5-6
Multiplexing Configuration 5-8
Connecting the SMDI Links to the VG248 5-12
Configuring VG248 SMDI Ports in Cisco CallManager 5-13
Configuring Voice Mail Parameters in Cisco CallManager 5-13
Adding the MWI Port to Cisco CallManager 5-14
To Next Page
Loading...
