vii
Cisco VG248 Analog Phone Gateway Software Configuration Guide
OL-1209-02
Contents
Adding and Configuring Voice Mail Ports in Cisco CallManager 5-16
Configuring End-User Phones 5-18
Configuring SMDI Settings on the VG248 5-19
Identifying the Pilot Directory Number 5-20
Assigning Number of SMDI Ports 5-21
Identifying the First Voice Mail Port Number 5-21
Setting SMDI Number Length 5-22
Allowing SMDI Number to be Truncated 5-23
Setting the SMDI Number Format 5-23
Assigning the Message Desk Number 5-24
Forwarding MWIs to Cisco CallManager 5-24
Forwarding MWIs to Async 2 5-25
Forwarding INV Responses to Async 1 5-26
Identifying the Directory Number for Setting MWI on
Cisco CallManager 5-26
Identifying the Directory Number for Clearing MWI on
Cisco CallManager 5-27
Entering a Keep Alive Number 5-27
Configuring Disconnect Notification 5-28
Verifying and Troubleshooting the SMDI Connection 5-28
Checking Link Status 5-29
Verifying Port Status and Displaying Port Statistics 5-29
Validating the SMDI Configuration on the VG248 Devices 5-30
Suspending SMDI Port Activity 5-31
Troubleshooting SMDI Errors and Warnings 5-32
Troubleshooting the VG248 6-1
Troubleshooting Hardware Errors 6-1
Displaying Hardware Status 6-2
To Next Page
Loading...
