B-1
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
APPENDIX
B
Connector and Cable Specifications
This appendix describes the Catalyst 3560 switch ports and the cables and adapters that you use to
connect the switch to other devices and includes these sections:
• “Connector Specifications” section on page B-1
• “Cable and Adapter Specifications” section on page B-4
Connector Specifications
• 10/100 and 10/100/1000 Ports, page B-1
• SFP Module Ports, page B-2
• Dual-Purpose Ports, page B-3
• Console Port, page B-3
10/100 and 10/100/1000 Ports
The 10/100 and 10/100/1000 Ethernet ports use standard RJ-45 connectors and Ethernet pinouts with
internal crossovers. These ports have the send (TD) and receive (RD) signals internally crossed so that
a twisted-pair straight-through cable and adapter can be attached to the port. Figure B-1 shows the pinout
for a 10/100 port.
To Next Page
Loading...
Need help?
General