- 6 -
4. UNPACKING AND SETTING UP THE MOISTURE ANALYZER
Unpack the moisture analyser carefully.
The carton contains
:
1. Drying chamber casing
2. Weighing pan support
3. Weighing pans
4. Weighing pans, pack of 10
Place the moisture analyser on a stable weighing table.
Do not install the balance near warm and cold sources, such as windows,
radiators or air conditioners. Protect the balance from vibrations, dust and
drafts.
Turn the adjustable feet until the balance is level (check the spirit level on
the rear of balance).
Install the weighing chamber liner on the 4 supports.
Install the pan support by placing the pan stem into the receptacle in the
weighing chamber. Be careful not to press on the pan as this may damage
the balance.
To Next Page
Loading...
Need help?
General
