97
XSARA
AUXILIARY EQUIPMENT DRIVE BELT
Without air conditioning
[2] Belt tension measuring instrument : 4122-T
- Tension the belt by loosening the screw (4) to obtain :
115 ± 10 SEEM units
- Tighten the screws (1) and (3).
- Rotate the crankshaft by 4 turns (direction of rotation).
- Loosen the screws (1) and (3).
- Tension the belt to :
115 ± 10 SEEM units (if necessary)..
- Tighten the screws (1) and (3) to 2 m.daN.
B1BP10HCB1BP10GC
Engine : DHY
ENGINE
To Next Page
Loading...
