98
ENGINE
XSARA
AUXILIARY EQUIPMENT DRIVE BELT
With air conditioning
Tools
(1) Peg : 7019-T.
.- Loosen the screws (1).
- Tighten or loosen the screw (2) until holes "a" and "b" are superimposed.
- Place the peg [1] : (in the hole "a").
- Tighten the screw (2) until it is against its stop.
- Loosen the screw (2), in order to remove the peg [1].
- Tighten the screws (1) to 2 m.daN.
B1BP1HHC
Engine : DHY
To Next Page
Loading...
