102
ENGINE
XSARA - XSARA PICASSO AUXILIARY EQUIPMENT DRIVE BELT
Engine : RHY
With air conditioning (Continued)
REFITTING.
Re-used belt.
- Compress the tensioner roller (7) by action at "c" (in anti-clockwise direction), tool [4].
- Refit the belt.
WARNING : Respect the direction belt was fitted.
- Remove the tool [4].
New belt.
- Refit the belt.
- Turn the eccentric roller (5), tool [1] (clockwise) to free the tool [2] from its pegging
at "d".
- Hold the eccentric roller (5), tool [1], and tighten the screw (6) to 4.3 m.daN.
Remove the tool [2].
- Rotate the crankshaft 4 times in the direction of rotation.
- Check that it is possible to peg at "d", tool [3].
- If not possible to peg, restart the adjustment.
B1BP1YND
To Next Page
Loading...
