186
INJECTION
CHECKING AND SETTING THE DELPHI MECHANICAL INJECTION PUMP
Engine : WJZ (continued)
Peg :
- The camshaft hub, using tool [2].
- The injection pump hub, using tool [3].
Impossible to peg the camshaft.
Reset the valve timing (See pages 127 to 131).
Possible to peg the camshaft, but not the injection pump.
Carry out the following operations:
- Loosen the screws of the injection pump hub.
- Turn the injection pump hub.
- Insert the peg [3] into the setting hole.
- Tighten the screws of the injection pump hub. Tighten to 2.3 ± 0.2 m.daN.
ESSENTIAL : If setting the diesel injection pump proves impossible, reset the valve
timing (See pages 127 to 131).
Remove:
- The tools [1]. [2] and [3].
- The screw (6) and the washer.
Reassemble the components.
B1EP12WD B1BP1S9C
XSARA
To Next Page
Loading...
