XSARA # 09/2000
263
XSARA - All Types
AXLE GEOMETRY
Front and rear measuring points
XSARA 09/2000 #
Rear heightFront height
AXLES
SUSPENSION
STEERING
Rear heightFront height
H1 = Dimension between the centre of the front suspension arm mounting and the ground.
H2 = Dimension between the contact face of the rear mounting and the ground.
R1 = Front wheel radius under load.
R2 = Rear wheel radius under load.
L1 = Distance between the centre of the wheel and the centre of the front suspension arm mounting.
L2 = Distance between the centre of the wheel and the contact face of the rear mounting on the bodyshell.
B3CP046D
To Next Page
Loading...
