XSARA # 09/2000
Front axle Rear axle
XSARA 09/2000 #
Front axle
AXLE GEOMETRY
Reference heights
Tools [1] Gauge for measuring the radius of wheels with 4 bolts : 8006-T
Setting the reference height.
RearFront
Measure the dimension «R1».
Calculate the dim. H1 = R1 - L1.
Measure the dimension «R2».
Calculate the dim. H2 = R2 + L2.
Compress the suspension until the values (H1) and (H2) are obtained.
NOTE : The difference in height between the two sides should be less than 10 mm.
XSARA - All Types
264
AXLES
SUSPENSION
STEERING
Reference heights 115.5 90.5 75.5 73 83 88 103
Engines
2.0i 16V
(RFS)
All Types
(except 2.0i 16V and CRD)
All Types
CRD
2.0i 16V
(RFS)
Saloons All Types
(except 2.0i 16V and CRD)
Estates
All Types
CRD
All types H1 = R1 – 85.5 mm H2 = R2 + 83 mm
Height H1 =R1 – L1 H2 = R2 + L2
Rear axle
B3CP04AD
To Next Page
Loading...
