A > B = Negative figure: – = TOE-OUT
A < B = Positive figure: + = TOE-IN
WARNING
288
AXLES
SUSPENSION
STEERING
288
AXLE GEOMETRY
Measurements at reference height (continued).
Compress the suspension to obtain the calculated values (see page : 287)
Front axle Rear axle
Vehicles Tracking Castor
King pin
inclination
Camber Tracking Camber
Adjustable ( Non-adjustable ) Adjustable
All types
0 mm ± 1mm 4.8 mm ± 1mm
- 0°09’à + 0°09’
3° ± 20’ 10° 45’ ± 30’ 0° ± 30’
0° 43’ ± 0° 09’
1°20’ ± 20’
NOTE : When checking axles, the vehicle should be at reference height.
B3CP02UC
XSARA PICASSO - All Types
All types
No load
150 mm (Minimum value)
Ground clearance
(*) = Fuel tank full.
To Next Page
Loading...
