CITROEN C2 - Head restraint; Backrest angle; Heated seats

78
ENGINE
B1BP2LSC
B1BP2LTC
AUXILIARY EQUIPMENT DRIVE BELT
Engines: HFX - KFV - NFU - NFS
Tools.
[1] Pliers for removing plastic pegs : 7504 -T
[2] Belt tension measuring instrument : 4122-T
V
ehicle without air conditioning.
Refitting
Refit the belt.
Respect the following sequence:
- Crankshaft pinion.
- Alternator pulley.
Place tool [2] on the belt.
Tighten screw (1) to achieve a tension of:
55 ± 3 SEEM units.
Tighten:
- Screw (3).
- Screw (2).
Remove tool [2] and complete the refitting.
Removing.
Slacken:
- Screw (2).
- Screw (3).
- Tensioning screw (1).
Push the alternator back towards the engine.
Remove the belt.
C2 - C3 - C3 PLURIEL
Angl.-t1-page037-91-2005 9/01/06 9:14 Page 78