CITROEN C2 - REAR SEATS

79
ENGINE
AUXILIARY EQUIPMENT DRIVE BELT
Engines: HFX - KFV - NFU - NFS
B1BP10XC
Vehicle with air conditioning.
Removing.
Slacken:
- Screws (6), (4) and (5).
- Fully detension the belt by acting on the tensioner roller.
- Remove the accessories drive belt.
Refitting.
Respect the following sequence:
- Crankshaft pinion.
- Aircon compressor pulley.
- Guide roller.
- Alternator pulley.
- Tensioner roller.
Place tool [2] on the belt.
- Tighten screw (5) to achieve a belt tension of:
120 ± 3 SEEM units.
- Tighten screws (4) and (6).
- Remove tool [2].
- Complete the refitting.
B1BP10VC
C2 - C3 - C3 PLURIEL
Angl.-t1-page037-91-2005 9/01/06 9:14 Page 79