CITROEN C2 - Storage pockets in the front doors

87
ENGINE
AUXILIARY EQUIPMENT DRIVE BELT
Engine: 8HY
B1BP2MYD
B1BP2MZC
Tools.
[1a] Dynamic tensioner roller lever : (-).0194-E1
[1b] Lever extension : (-).0194-E2
[2] Accessories belt roller locking peg Ø 4 mm : (-).0194-F
Removing.
Pivot the tensioner roller support (1) (clockwise) , using tools [1a] and [1b] at «a».
Remove the belt.
Immobilise the support (1) of the tensioner roller, using tool [2].
Remove the auxiliary drive belt (2).
IMPERATIVE: Ensure that the tensioner rollers turn freely
(no play, no tight spot) .
Refitting.
Refit the belt.
Move the tool [1] on the tensioner roller to remove the peg [2].
ESSENTIAL: Make sure that the belt is correctly positioned in the various pulley
grooves.
C3
Angl.-t1-page037-91-2005 9/01/06 9:14 Page 87