CITROEN C2 - Page 94

88
ENGINE
88
B1BP3ACD
B1EP18UD
AUXILIARY EQUIPMENT DRIVE BELT
Engine: 9HX
Tools.
[1a] Dynamic tensioner roller lever : (-).0194-E1
[1b] Lever extension : (-).0194-E2
[2] Dynamic tensioner roller locking peg : (-).0194-F
IMPERATIVE: Respect the safety and cleanliness requirements specific to High pressure Diesel
injection (HDi) engine versions.
Markings on the dynamic tensioner roller.
«a» position «maximum wear» of the auxiliaries drive belt.
«b» Nominal position.
Removing.
WARNING: Mark the direction of fitting of the auxiliaries drive belt in the case of re-use of the belt.
Compress the dynamic tensioner roller (1) by acting at «c»
(clockwise) , using tool [1].
Peg using tool [2] at «d».
Keep the dynamic tensioner roller (1) compressed and remove the auxiliaries drive belt.
C3
Angl.-t1-page037-91-2005 9/01/06 9:14 Page 88