CITROEN C2 - REAR PARCEL SHELF; Removal; Refitting

89
ENGINE
B1BP3ACD
B1EP18UD
AUXILIARY EQUIPMENT DRIVE BELT
Engine: 9HX
Refitting.
WARNING: Belt to be re-used, mark the direction of fitting of the belt.
Refit the auxiliaries drive belt.
Compress the tensioner roller (1) by acting at «c» (clockwise) , using tool [1].
Remove tool [2].
IMPERATIVE: Make sure that the auxiliaries drive belt is correctly positioned in the grooves
of the various pulleys.
Refit:
- The front RH wheel.
- The sound-deadening under the engine.
- Reconnect the battery.
IMPERATIVE: Carry out the operations that are necessary following a reconnection of the battery
(see corresponding operation) .
C3
Angl.-t1-page037-91-2005 9/01/06 9:14 Page 89