CKD AX0180 - Edit Program Number Changing Procedure

[SMB-66E]
－ 16 －
OPERATION
2
2.4.7 Edit program number changing procedure
1) Select "7 NO." from the edit mode menu.
※
※※
※ For the selection method, follow the mode
selection procedure.
2) Select "1 EDIT" from the following menu.
3) The number of the program being edited is
displayed at the upper right.
Enter the new number and press
.
4) The following message is displayed and the
number changes.
The edit mode selection menu is displayed again.
ＥＤＩＴ ＭＯＤＥ
←６ＬＩＳＴ ７ＮＯ． →
ＮＯ．ＣＨＮＧ
１ＥＤＩＴ ２ＡＢＳ’ＤＸ
Number of the program
being edited
ＥＱＬ ＳＥＧ ０１
ＰＲＧＭ ＮＯ． ［ ］
Either EQL SEG or NC program is
displayed according to the program
being edited.
★
If the new number is "5"
＊ＣＨＡＮＧＥＤ＊
ＰＲＧＭ ＮＯ． ［ ５］
ＥＤＩＴ ＭＯＤＥ
←６ＬＩＳＴ ７ＮＯ． →