CKD AX0180 - ABSODEX Driver Program Number Changing Procedure

[SMB-66E]
－ 17 －
OPERATION
2
2.4.8 ABSODEX driver program number changing procedure
1) Select "7 NO." from the edit mode menu.
※
※※
※ For the selection method, follow the mode
selection procedure.
2) Select "2 ABS'DX" from the following menu.
3) Enter the previous number and press
.
※
※※
※ If a number not found in the ABSODEX driver is
entered, the following error message is
displayed. Enter the number again.
4) Enter a new number (one not registered in
ABSODEX) and press
.
※
※※
※ If a number found in the ABSODEX driver is
entered, the following error message is
displayed. Enter a new number.
5) The following message is displayed and the new
number is registered to the ABSODEX driver.
The edit mode selection menu is displayed again.
[Reference]
１． Press
MODE
to return to the menu.
２． Press
during entry of a new number to return to the state before the change.
ＥＤＩＴ ＭＯＤＥ
←６ＬＩＳＴ ７ＮＯ． →
ＮＯ．ＣＨＮＧ
１ＥＤＩＴ ２ＡＢＳ’ＤＸ
★
If program number "3" is not found
ＮＯ．ＣＨＮＧ
ＢＥＦ［ ］→ＡＦ［ ］
ＮＯ ＰＲＧＭ ＮＯ．
ＢＥＦ［ ３］→ＡＦ［ ］
★
If "2" is entered as an old number
★
If program number "1" is found
ＮＯ．ＣＨＮＧ
ＢＥＦ［ ２］→ＡＦ［ ］
ＲＥＧＩＳＴＥＲＥＤ
ＢＥＦ［ ２］→ＡＦ［ １］
★
To enter "5" as a new number
＊ＣＨＡＮＧＥＤ＊
ＢＥＦ［ ２］→ＡＦ［ ５］
ＥＤＩＴ ＭＯＤＥ
←６ＬＩＳＴ ７ＮＯ． →