CKD AX0180 - Parameter Data Initialization Procedure

[SMB-66E]
－ 30 －
OPERATION
2
2.6.3 Parameter data initialization procedure
All the parameters stored in the driver are initialized (deleted) after the procedure described here.
Record parameters before proceeding.
1) Select "4 INITIA" from the parameter menu and
press
.
2) Parameters in the FLASH MEMORY and RAM of
the driver are initialized.
Parameters kept in the Teaching Pendant are not
deleted.
※
※※
※ For the initial values, refer to Section 4.1
"Parameters and Contents."
※
※※
※ Control power must be restarted to return to
default settings. Press
after confirming
the following message.
3) The mode selection menu is displayed again.
ＰＡＲＡ
←３ＳＴＯＲＥ ４ＩＮＩＴＩＡ→
＊ＩＮＩＴＩＡ＊
ＭＯＤＥ ＳＥＬＥＣＴ
←２ＤＩＳＰＬＡＹ ３ＰＡＲＡ→
ＴＵＲＮ ＤＲＩＶＥＲ ＯＦＦ
ＴＵＥＮ ＯＮ ＡＧＡＩＮ