Terms of warranty
The warranty period and the scope of warranty are described below.
1) Period
The warranty period of the product is one year since the date of delivery. (However, the
period assumes eight hours of operation per day. As well, if the durability limit is reached
within one year, the period to the durability limit is the warranty period.)
2) Scope
If failure is caused in the above warranty period due to poor workmanship of our product,
we will repair the product without charge without delay.
However, the scope of warranty shall not cover the following cases.
➀ Operation under the conditions or in the environment derailing from those
specified in the product specifications
➁ Failure caused by lack of attention or erroneous control
➂ Failure caused by other than the delivered product
➃ Failure caused by operation derailing from the purposes for which the product is
designed
➄ Failure caused by modification in the structure, performance, specification or other
features made by other than us after delivery, or failure caused by repairs done by
other than our designated contractor
➅ Loss in our product assembled to your machine or equipment, which would be
avoided if your machine or equipment were provided with general functions,
structures or other features common in the industry
➆ Failure caused by reason that is unforeseeable with technology put into practical
use at the time of delivery
➇ Failure caused by fire, earthquake, flood, lightning, or other acts of God, earth
shock, pollution, salt hazard, gas intoxication, excessive voltage, or other external
causes
The warranty mentioned here covers the discrete delivered product.
Only the scope of warranty shall not cover losses induced by the failure of the delivered
product.
3) Warranty of product exported outside Japan
➀ We will repair the product sent back to our factory or company or factory
designated by us. Work and cost necessary for transportation shall not be
compensated for.
➁ The repaired product will be packed according to the domestic packing
specification and delivered to a designated site inside Japan.
4) Others
This warranty terms describe basic items. Priority will be given to specification drawings
and specification sheets if warranty description given on such specification drawings or
specification sheets is different from the warranty terms given herein.
To Next Page
Loading...
Need help?
General