Clack WS1 Series User Manual

WS1”, 1.5” & 2” Series Watersoftener
Installation Operation Maintenance Manual
SIMPWS1 REV3 13/07/11 PAGE 12 OF27
NEXT
NEXT
NEXT
NEXT
Set effluent hardness in ppm if mixing valve fitted, if
no mixing valve fitted then set to 0 if metered. NA if
timeclock.
Set day regeneration override for metered softeners
OR set frequency of regenerations for Timeclock
valves (1-28 days)
Set time for regeneration hours. Time for Immediate
regeneration valves cannot be altered and will show “on
0”
Returns to time of day

Clack WS1 Series Specifications

General

Series	WS1
Regeneration	Upflow
Certifications	NSF/ANSI 44
Operating Temperature	34 - 120°F (1 - 49°C)
Power Supply	12 VAC
Type	Water Softener