Clarion FX688A - Connecting a USB Memory;Mtp Device; Watching;Listening to a Track with USB Memory Device; Unplug the USB Memory;Mtp Device

14
English
• AlwaysinserttheUSBmemory/MTPdevicefullyintothe
port. Incomplete connections may cause the USB memo-
ry/MTP device not be recognized.
• Depending on the number of tracks recorded, some
amount of time may be required until all tracks are read
into the unit. It will take some time to read the USB mem-
ory/MTP device before playback begins.
• USBmemory/MTPdevicesmayhavedifferentshapede-
pends on brands. Some USB memory/MTP devices may
not be able to plug into the port due to the shape design.
Please use an extension cable instead.
• Pleasereconnect theUSBmemory/MTP devicewhenit
cannot be detected properly.
Note:
• Do not forcibly connect theUSB memorydevice tothe
port with incorrect direction as this will damage the USB
memory device as well as the USB slot.
Watching/Listening to a track with USB mem-
ory device
If a USB memory/MTP device have been inserted,
press the [HOME] button to select the audio or
video player mode.
Note:
• Ifyoureconnectthesamedevicethatyoudisconnected
last, the system will playback where it left off.
Notes on using USB memories/MTP device
• Ifthedevicehasnosupportedfiles,“NoFileAvailable”is
displayed.
• Ifyoureconnectthesamedevicethatyoudisconnected
last, the system will resume the last playback position.
1. Remove the USB memory/MTP
device from the USB slot during
playback or reading. The unit
will display “No Device”.
Connecting a USB memory/MTP device
1. Connect the USB memory/MTP device into the
port with the correct direction.
CAUTION
• Forsafetydrivingpurpose,avoidinsertingtheUSBmem-
ory/MTP device directly into the USB port.
• Always backup and save important data on your com-
puter.
Unplug the USB memory/MTP device