Clarion FX688A User Manual

31
English
Bluetooth Device Manager
1. Press the button in the tab menu to select
Handsfree. The display will change accordingly.
2. Press the button in the tab menu to select
Bluetooth Audio. The display will change accord-
ingly.
21 3
1) Delete all devices
2) Connect / disconnect / pair device
3) Delete selected device
Pairing with a phone
1. Press the button to add a new device.
The display will change accordingly.
2. Turn on Bluetooth function on the mobile phone
and set to discoverable mode before proceeding.
3. A list of discoverable devices will be available.
Select the desired device to pair with the unit.
4. Perform either one of the methods below: For
phone that supports Simple Secure Pairing
(SSP): A random 6 digit passkey will be gener-
ated. Compare the passkey and make sure it is
the same. Then, press [OK] on both the unit and
phone.
For classic phone:
Enter the defined PIN code when prompt (“0000”
by default).
5. Once pairing is successful, the phone will be con-
nected automatically. Some phones may require
manual connection from the phone.
6. The unit can pair to up to 5 phones.
Manually connecting a phone
1. Press the button to connect to a paired
device. The display will change accordingly.
2. Bluetooth indicator will be turned on when con-
nection is successful.
Note:
• Whenthephoneisconnected,someadditionalBluetooth
indications will be displayed.
Manually disconnecting a phone
1. Press the button to disconnect a con-
nected device. The display will change accord-
ingly.
2. Bluetooth indicator will be turned off when dis-
connection is successful.
Notes:
• DisconnectioncanalsobedonebyturningoffBluetooth
option, car ignition or directly from the phone.
• When the phoneis out ofrange, Bluetooth willbe dis-
connected. The system will automatically re-connect the
phone (Handsfree) when it is within range (depends on
Settings).
Deleting a Bluetooth Device
1. Select a desired device and press the but-
ton to delete the paired device. The display will
change accordingly.
2. A confirmation screen will be displayed on the
unit.
3. Press [OK] to confirm, or [Cancel] to cancel the
process.
4. To delete all devices simultaneously, Press
. All paired device will be deleted
Note:
• Whenthephoneisconnected,someadditionalBluetooth
indications will be displayed.

Clarion FX688A Specifications

General

Brand	Clarion
Model	FX688A
Category	Car Receiver
Language	English