To Next PageTo Next PageWhat to do if sound is no longer output from the connected audio device (Bluetooth audio) on Clarion NX604 Car Receiver?
To resolve this issue with your Clarion Car Receiver, specify the Bluetooth audio device again from the portable device’s setting screen.
How to fix Clarion Car Receiver GPS reception not displayed?
If the GPS reception is not displayed on your Clarion Car Receiver, first ensure the antenna cable is securely connected. If it is, check for any obstructions that might be blocking the signal. Keep in mind that satellite positioning can sometimes be poor, affecting reception. If these steps don't work, the display should appear once you start driving the vehicle.
What to do if Clarion NX604 skipping sound contains noise?
If you're experiencing skipping or noise issues with your Clarion Car Receiver, the disc might be dirty. Try wiping the disc with a dry cloth. If the problem persists, the disc may be scratched, and you should replace it with an unscratched disc.
Why no sound is output after the power is turned on in Clarion NX604?
If your Clarion Car Receiver is not outputting any sound after turning it on, there might be water drops on the lens inside. Leave the unit with the power on for about one hour to allow it to dry.
What to do if Clarion NX604 displays “Disc read error.”?
If your Clarion Car Receiver displays the 'Disc read error' screen, ensure you load the disc with its label surface facing up.
How to resolve jumping/skipping of MP3/WMA on Clarion NX604?
If your Clarion Car Receiver is experiencing skipping with MP3/WMA files, try changing the encoder software and recording the files again.
Why is the MP3/WMA sound poor on my Clarion NX604?
If your Clarion Car Receiver has poor MP3/WMA sound quality, try recording at a higher sampling frequency or bitrate.
How to troubleshoot skipping (USB memory) on Clarion NX604 Car Receiver?
If your Clarion Car Receiver is skipping while playing from USB memory, test the USB memory on a personal computer to see if the skipping issue persists.
How to improve poor sound (USB memory) on Clarion NX604 Car Receiver?
If you are experiencing poor sound quality when playing from a USB memory device on your Clarion Car Receiver, try recording at a higher sampling frequency or bitrate.
Why no sound is output or disc immediately ejected on Clarion NX604?
If your Clarion Car Receiver is not outputting any sound after inserting a disc, or if the disc is immediately ejected, make sure to load the disc with its label surface face up. Also, finalize the disc so that it can be used. Note that MIX MODE CDs and 8 cm discs cannot be played, so eject them.
General| Resolution | 800 x 480 pixels |
|---|---|
| Touchscreen | Yes |
| Bluetooth | Yes |
| USB Port | Yes |
| SD Card Slot | Yes |
| DVD Player | Yes |
| SiriusXM Ready | Yes |
| AUX Input | Yes |
| AM/FM Tuner | Yes |
| CD Playback | Yes |
| Built-in Microphone | Yes |
| Steering Wheel Control | Yes |
| Rear View Camera Input | Yes |
| Audio Formats Supported | MP3, WMA, AAC |
| Display Size | 6.2 inches |
| Navigation | Yes |
| Power Output | 50W x 4 channels |
| Video Formats Supported | MPEG |
