C
Carolyn SmithAug 30, 2025
How to reduce noise (Radio) on Clarion NX604?
- TthomasdavidAug 30, 2025
If your Clarion Car Receiver has lots of noise when using the radio, tune to the correct frequency.
To Next PageTo Next PageHow to reduce noise (Radio) on Clarion NX604?
If your Clarion Car Receiver has lots of noise when using the radio, tune to the correct frequency.
What to do if Clarion Car Receiver stations cannot be tuned to automatically?
If your Clarion Car Receiver cannot automatically tune to stations, manually select the station.
Why Clarion Car Receiver cannot connect (Bluetooth audio)?
If your Clarion Car Receiver is not connecting via Bluetooth audio, ensure the Bluetooth-compatible device is correctly connected and turned on. The unit's connection and potential skipping can depend on the distance and installation location of the Bluetooth audio device, so position the audio device for optimal reception.
How to stop MP3/WMA skipping on Clarion NX604 Car Receiver?
If your Clarion Car Receiver is experiencing MP3/WMA skipping, play the file on a personal computer to see if skipping occurs there as well.
Why Clarion Car Receiver cannot play from USB memory?
If your Clarion Car Receiver cannot play from a USB memory device, remove the USB memory and insert it again. Also, verify that the USB memory is compatible with the unit.
Why is the list not displayed (iPod) on Clarion NX604 Car Receiver?
If your Clarion Car Receiver is not displaying the list for your iPod, it may be because the number of items displayed in the list is limited. This is not a malfunction.
Why Clarion NX604 Car Receiver cannot play from microSD card?
If your Clarion Car Receiver cannot play from a microSD card, check to see if the microSD card is compatible with the unit.
Why iPod audio is not output on Clarion Car Receiver?
If your Clarion Car Receiver is not outputting audio from the iPod, operate from the iPod and switch the settings (audio output) from Bluetooth (CAR-BT) to the Dock connector. Also, remove the iPod from the unit and reconnect it.
Why track name, artist name and album name are not displayed (Bluetooth audio) on Clarion NX604?
If your Clarion Car Receiver is not displaying the track name, artist name, and album name via Bluetooth audio, use audio devices that are compatible with AVRCP Ver.1.3. Restart the player on the Bluetooth Audio device side.
How to fix error message when Smartphone linking is not possible on Clarion NX604 Car Receiver?
If your Clarion Car Receiver displays an error message and Smartphone linking is not possible, cancel the sleep state on the smartphone. Ensure you have installed the linking-compatible application and application management software “Smart Access” on the smartphone beforehand, and start up the linking-compatible application on the smartphone. Reconnect the smartphone in a place with good reception, and try disconnecting and reconnecting the connector cable. Check the OS setting on the unit. For Android smartphones, enable the HDMI output setting on the smartphone and check the supported HDMI output resolutions on the unit. Also, check if the smartphone supports Bluetooth SPP and HID profiles.
General| Resolution | 800 x 480 pixels |
|---|---|
| Touchscreen | Yes |
| Bluetooth | Yes |
| USB Port | Yes |
| SD Card Slot | Yes |
| DVD Player | Yes |
| SiriusXM Ready | Yes |
| AUX Input | Yes |
| AM/FM Tuner | Yes |
| CD Playback | Yes |
| Built-in Microphone | Yes |
| Steering Wheel Control | Yes |
| Rear View Camera Input | Yes |
| Audio Formats Supported | MP3, WMA, AAC |
| Display Size | 6.2 inches |
| Navigation | Yes |
| Power Output | 50W x 4 channels |
| Video Formats Supported | MPEG |
