Clarius Scanner HD3 Cleaning
revision 9 37
Cleaning the Clarius Power Fan HD3
To clean the Clarius Power Fan HD3:
1. Remove the fan from the Clarius Scanner HD3.
2. Wipe down all surfaces using a premoistened disinfectant wipe.
For a list of compatible cleaners, see Cleaners & Disinfectants on page 74.
3. Repeat with new cleaning material if necessary.
4. Air-dry the fan. Alternatively, use a non-linting cloth.
When you are done, keep the two components separate. You will be disinfecting them
individually.
Cleaning the Micro USB Cable
To clean the Micro USB cable:
1. Detach the USB A to from the power supply.
2. Detach the Micro USB cable from the Clarius Power Fan HD3.
3. Wipe down all surfaces using a premoistened disinfectant wipe for one minute until
visibly clean.
For a list of compatible cleaners, see Cleaners & Disinfectants on page 74.
4. Repeat with new cleaning material if necessary.
5. Air-dry the Micro USB cable. Alternatively, use a non-linting cloth.
When you are done, keep the two components separate. You will be disinfecting them
individually.
Cleaning the Clarius Charger HD3
To clean the Clarius Charger HD3:
1. Unplug the Clarius Charger HD3 from the power source.
2. Disconnect the Micro USB cable from the Clarius Charger HD3.
3. Wipe down all surfaces using a premoistened disinfectant wipe. Do not submerge the
Clarius Charger HD3 in any liquid.
To Next Page
Loading...