30
Accessories
To order these additional accessories, go to clarius.com/contact:
• Clarius Charger HD3
• Clarius Power Fan HD3
Clarius Charger HD3
The Clarius App displays the scanner’s battery level on your smart
device. Because the Clarius Scanner HD3 is battery-operated, you
must recharge its battery when necessary. An empty battery takes
approximately 1 ½ hours to fully charge.
A fully charged battery gives you approximately 45 minutes of typical
scanning time. Scanners in sleep mode will send battery warning
notifications, via BLE, using your smart device’s standard notification
services.
About the Clarius Charger HD3
The Clarius Charger HD3 is included with your Clarius Ultrasound
Scanner. It is designed to be used with the following products:
• Clarius Scanner C3 HD3 (CIDN 99-13-00018)
• Clarius Scanner C7 HD3 (CIDN 99-13-00019)
• Clarius Scanner EC7 HD3 (CIDN 99-13-00024)
• Clarius Scanner L7 HD3 (CIDN 99-13-00020)
• Clarius Scanner L15 HD3 (CIDN 99-13-00021)
• Clarius Scanner L20 HD3 (CIDN 99-13-00022)
• Clarius Scanner PA HD3 (CIDN 99-13-00023)
• Clarius Scanner PAL HD3 (CIDN 99-13-00029)
To Next Page
Loading...