Clarius Scanner HD3 Imaging
revision 9 26
Scanner Notifications
The Clarius Ultrasound Scanner displays no error messages. Instead, the Clarius Scanner HD3
presents visual notifications in the form of status lights, and audible notifications in the form of
status alerts.
Status Lights
The following table defines the Clarius Scanner HD3’s status lights:
Audible Notifications
The following table defines the audible indicators the Clarius Scanner HD3 emits:
Color Display Meaning
Blue Flashing Scanner is booting up.
Blue Solid Scanner is ready for a Wi-Fi connection or has a connection and is not imaging.
Green Solid Scanner is imaging.
Orange Flashing Battery is low.
Orange Solid
Software error.
Red Flashing Battery is critically low.
Red Solid Hardware error.
Purple Flashing Software/firmware is updating.
Sounds Meaning
2 quick beeps Scanner components are ready
3 quick beeps Bluetooth is ready
2 tone-increasing pitches Power on
2 tone-decreasing pitches Power off
1 beep every few seconds Battery is critically low
Ringing Find my scanner
To Next Page
Loading...