1 – 4
• Prepare a suitable working plan according to the conditon of work area,
machinr type and capacity, and load type and shape.
• Use a signal person when operating the machine in a narrow area.
SAFETY PLAN
6. BASIC PRECAUTIONS
• Always keep the working area level, and remove all spilled grease, oil or other
materials.
• Avoid operating the machine near criffs, platforms or docks.
Use safety blocks if it is unavoidable to work in that place.
• Use “KEEP AWAY” signs in dangerous areas.
• Travel the fork lift only on the specified road.
• Use “NO THOROUGHFARE” signs to keep unauthorized vehicles out of the
unloading area.
• lluminate the work area to improve visibility.
ACCIDENT PREVENTION
• Always keep the around of operator’s seat clean. Spilled oil or mud can cause
wrong operationg of the machine to result in personnel injury.
• Do not place parts, tools or other objects near the operator’s seat. They could
hinder or prevent the safe operation of the machine.
CLEAR OPERATOR’S SEAT
To Next Page
Loading...
