Clark CER10 - Check before Working; Checking Points

2 – 24
The operator never fail to inspect the following items before the day’s working for
safe operation and optimum performance of the fork lift.
19.1 CHECKING POINTS
19. CHECK BEFORE WORKING
Check contents
Operating distance of pedal, performance of brake
Loose, rattle, gap
Operating condition (the machine attached with EPS)
Operating condition, breakage, oil leakage
Oil leakage
Oil level
Chain tension on right/left
Abnormal wear, damage
Loose, damage
Battery volumeter lamp after
key switch “ON”
Light condition, horn sound
<System check> after key
switch “ON”
Loose tightening bolt, nut, and
damage
Abnormality
Item
Brake pedal
Clearance of steering wheel
Power steering
Operation of each part
Pipes
Hydraulic oil
Lift chain
Tires
Bolt
Charging condition
Turn signal lamp, horn, head
lights, tail lights, back lights
Operating condition
Overhead guard, back
rest
Others
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
Class.
Brake system
Steeringl
system
Attachments
and hydraulic
system
Axle
Battery
Lamp, Warning
device
Safety monitor
Others