Clear-Com HME DX210 User Manual

19
Clear-Com HME DX210 Operating Instructions
5.2 BP210 Beltpack Specifications
GENERAL
Channels:
2 audio channels
Frequency Range:
2400 MHz – 2483.5 MHz
Antenna:
Internal, horizontal/vertical diversity
Frequency Response:
200 Hz to 3.5 kHz
Battery Requirements:
3.6V lithium ion
Battery Life:
Up to 20 hours
Temperature Range:
32-122°F (0-50°C)
Weight:
7.4 oz (.21 kg) with battery and pouch
Headset Connector:
4-pin, mini-DIN
Microphone:
Electret
Headset Output:
160mW into 32Ω
Controls:
Power, Volume-up, Volume-down, IC1, IC2, ISO
Indicators:
Dual-color LED (red/green)
Communication Security:
64-bit encryption
System Distortion:
<2%
BELTPACK TRANSMITTER
Type:
Frequency Hopping, Spread Spectrum
Transmit Power:
100mW burst
Transmission Modes:
Momentary or latch
Modulation Type:
Gaussian filtered FSK, TDMA
Frequency Stability:
13 ppm
Harmonics/Spurious:
Exceeds FCC and ETSI specifications
BELTPACK RECEIVER
Type: RF Sensitivity:
Frequency Hopping, Spread Spectrum <-90dBm w 10-3 BER
Frequency Stability:
13 ppm
Distortion:
<2%

Clear-Com HME DX210 Specifications

General

Brand	Clear-Com
Model	HME DX210
Category	Intercom System
Language	English