Clear-Com HME DX210 - Page 33

27
Clear-Com HME DX210 Operating Instructions
Spectrum Friendly
All DX Series wireless intercom systems now feature Spectrum Friendly™ technology for interference-free
operation in the increasingly crowded 2.4GHz frequency band. This new technology enables broadcast
and theatrical production crews to avoid emerging frequency conflicts by designating the 2.4GHz operating
frequency range: low-, high-, or full-band.
While generally not a problem when separated, multiple applications and multiple users of the same
applications in close proximity can result in additional risk for trouble-free operation. The new technology
further ensures that products do not add interference to the spectrum for other essential wireless services
in the vicinity, such as DMX-controlled lighting.
Avoiding Wi-Fi Interference
To avoid interference with Wi-Fi systems, it is recommended to set the Wi-Fi system to something other
than channel 6 or 7.
Your DX210 should be set to the high or low band opposite any Wi-Fi frequency range in use.
DX210 Low Band = 2.4000-2.4400 GHz
DX210 High Band = 2.4433-2.4830 GHz
Channel
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Wi-Fi Frequencies
2.412
2.417
2.422
2.427
2.432
2.437
2.442
2.447
2.452
2.457
2.462
2.467
2.472
2.484
GHz