24
Figure 9
Figure 8
Step 2
Re-attach the Harness:
• Route Shoulder Harness Straps and
Harness Adjuster Strap between Base
Attachment Bars and bottom of Carrier,
as shown in Figure 8.
• Hold the silver Metal Harness Plate straight up
ensuring there are no twists in the Harness Adjuster
Strap, and slide the loop end of each Shoulder
Harness Strap through the slot in the Metal Harness
Plate, ensuring that each Strap is completely inside
the slot as shown in Figure 9.
To Next Page
Loading...
