Clek Liing - Adjusting the Canopy

40
The Carrier has a 3-position Canopy. All Canopy
positions are approved for use in vehicle or outside
of vehicle.
To adjust the Canopy between the closed position
(Position 1) and the open position (Position 2): grasp
the front of the Canopy and pull it forward or rotate
it back.
To fully extend Canopy: Grasp zipper tab and unzip
the canopy extension. Then grasp front of Canopy
and pull it forward to the fully-open position (Position
3), as shown in Figure 29.
NOTE: The canopy extension MUST be zipped closed
when using either Position 1 or 2.
Adjusting the Canopy
Position 1
Position 2
Position 3
Figure 29
2