Clek Liing - Operation and Adjustments; Carry Handle Adjustment

37
Operation and Adjustments
Carry Handle Adjustment
The Carry Handle has three adjustment positions as
shown in Figure 25: Upright (1), Stowed (2), Ground (3).
Step 1
Select the proper Carry Handle Adjustment Position:
• Using inside of the vehicle: The Handle MUST be
locked in the upright position.
• Using outside of the vehicle: The Handle may be
used in any of the (3) adjustment positions, but MUST
be locked in the upright position before lifting and
when being carried.
Figure 25
3
1
2
WARNING
• ALWAYS check that the Carry Handle is locked in the Upright
Position before lifting Carrier by the Handle. An unlocked handle
could move unexpectedly, causing a child to fall.