Clek Liing - Removing Car Seat without Base Installed with Vehicle Belt

86
Removing Car Seat without Base Installed with Vehicle Belt
Step 1
If installed with lap-only belt:
• Unbuckle vehicle belt.
If installed with lap/shoulder belt:
• With one hand: Hold the shoulder belt so it doesn’t get shorter.
• With the other hand: Unbuckle vehicle belt, remove the shoulder belt from the blue
Shoulder Belt Guide, and move the shoulder belt over and off of Carrier.
Step 2
Remove the lap belt from the blue Vehicle Lap Belt Guides.
Step 3
Remove Carrier from vehicle.