23
Rethreading the Shoulder Harness
Step 1
If using with the Newborn Support System Headrest:
• Insert the Shoulder Harness Straps through the
Harness Slots in the Headrest, ensuring that the
Straps are not twisted.
• From front of Carrier, insert the Shoulder Harness
Straps through the chosen Shoulder Harness Slots in
the Carrier Seat Back as shown in Figure 6, ensuring
that the Straps are not twisted.
If using without the Newborn Support System
Headrest:
• From front of Carrier, insert the Shoulder Harness
Straps through the chosen Shoulder Harness Slots in
the Carrier Seat Back as shown in Figure 7, ensuring
that the Straps are not twisted.
Figure 6
Figure 7
To Next Page
Loading...
