To Next Page

To Previous Page

Modules & Options

Intel® Rapid Start Technology Driver 7 - 37

Intel® Rapid Start Technology Driver

Intel(R) Rapid Start Technology can resume power from Hibernation within 5 to

6 seconds and can remember your computer's previous state with zero power.

System Requirements to support Intel® Rapid Start Technology:

• Rapid Start Technology should be enabled in the BIOS (see ““Intel(R) Rapid

Start Technology (Advanced Menu)” on page 5 - 8).

• Intel Rapid Storage Technology software installed (see “Intel® Rapid Storage

Technology” on page 7 - 36).

• A Solid State Drive (SSD) with a minimum capacity of 18.6GB.

• The Solid State Drive (not the HDD) must be configured as outlined on the fol-

lowing pages to support Rapid Start Technology.

•The Windows operating system must be installed on the system hard disk drive,

and not on the Solid State Drive (SSD).

See overleaf for instructions on enabling Intel® Rapid Start Technology.



Operating System Installation

Note that in order for Intel(R) Rapid Start Technology to function properly the Windows

operating system must be installed on the system hard disk drive (e.g. the “C:” drive), and

the SSD should be configured as outlined on the following pages. Rapid Start will not func-

tion if the operating system is installed on the SSD.

Clevo W550SU2 User Manual

Questions and Answers: