Compact controller ER 2022S and ER 2022SA
5. Operation
5.4
Entries and operator prompting
Entering values When entries are made within the levels, the parameter symbol is
shown in the lower display.
Select parameter
Alter parameter
I
D
h
Select parameter with
I
or
D
h C
hange to
entry mode with P (lower display blinks!)
h
Alter value with
I
and
D
The value alters dynamically with the duration of the key stroke.
h Accept the setting with
P,
or automatically
after 2sec or
h
Cancel entry with X.
Entering times When entering times (e.g., timer time), the time unit is shown in addition.
Select parameter
Alter parameter
I
D
The highest time unit of the display is shown for the unit.
If, for instance, “h” is shown for the hour, then the time format for the
value is hh:mm.
h
Select parameter with
I
or
D
h Change over to the entry mode using P (lower display blinks!)
h
Alter value with
I
and
D
The value alters dynamically with the duration of the key stroke.
h Accept the setting with
P
or automatically after 2sec
or
h
Cancel entry with X.
The value is not accepted.
I I I I I I I I I I I I I
To Next Page
Loading...