Compact controller ER 2022S and ER 2022SA
5. Operation
5.6.1 Entering programs
The program segments (up to eight) are defined by the segment setpoint and
the segment time.
Entry trough
setup program
The setup program (accessory) features a user-friendly
program editor, with a graphical presentation of the program
profile.
Additional - Start the process value
functions via - Response to over/under range
the setup - Repeat program
program - Set point input (ramp/step)
- Process is controlled to the most recent set point
- Delay time
- Program editor/management with graphical preview
- Up to four control contacts can be programmed segment by segment
- Parameter sets can be assigned segment by segment
To Next Page
Loading...