MAN.243 Rev.5 ENG - Use and maintenance manual S28 page 22 of 138
The MEWP can also be equipped with a power supply
selector (Picture 7b - *optional) capable of providing
electric motor’s dual power supply at 110 V and 230 V.
The desired one can be set thanks to a special electric
selector (Picture 7b - *optional) fixed to the frame.
Picture 7b: transformer box* with voltage selector.
This allows you to have electrical outlets of both voltages
(Picture 7c): on the ground to power the electric motor
Picture 7c: transformer box* with voltage selector.
and/or in the basket (*optional) to power work tools. Note
that basket’s supply voltage is not settable and is
provided according to customer’s need.
3.2 Platform control stations
The main standard platform control station is:
o AUTEC radio control (Picture 13).
The *optional platform control stations are:
To Next Page
Loading...
Need help?
General
