Software ver. CVPCA30E_1 38
Enter the volume of the Clinician Bolus and press to
begin priming procedure. You may stop the bolus at any
time by pressing .
The Volume for the Bolus will be in ml, mg or µg depending
on the settings of the existing protocol entered for the PCA
infusion.
The display screen will show a graph indicating the Bolus is
being infused. The graphical bar displays the amount of the
bolus to be infused (clear) and the amount infused (dark).
Once the bolus is completed, the pump will resume the original PCA infusion.
User can stop bolus at any time by pressing
To Next Page
Loading...
Need help?
General
