2201R Mobile Tester User Guide
Chapter 4 Autotest
47090/322
Copyright © 2015 Aeroflex Limited. All rights reserved.
99
4. Confirm with Yes if you are sure not to overwrite result and log files that you want to keep.
The Autotest result and log files are copied from the 2201R to the USB flash drive into a folder named Data.
When the data transfer is completed, the following message is displayed: “USB flash device can be removed.”
5. Confirm the message by pushing the OK soft key.
The 2201R now asks if the files that were copied should be removed from the 2201R.
6. Confirm with Yes to delete or refuse with No.
It is now safe to remove the USB flash drive and plug it into a USB slot of a PC.
To Next Page
Loading...
Need help?
General