2201R Mobile Tester User Guide
Chapter 4 Autotest
47090/322
Copyright © 2015 Aeroflex Limited. All rights reserved.
98
Transferring result files to a PC
Detailed test result files and test summaries can be saved to a USB flash drive; they can then be loaded onto a PC for
archiving and post-processing purposes.
1. Select Autotest.
The Autotest menu appears.
2. Push the Transfer Test Data button.
The Transfer Test Data menu appears.
3. Push the Upload Data button. Do not remove the USB drive before copying is completed.
The 2201R asks if data on the USB drive should be overwritten even if there are no results and log files on the
USB drive.
To Next Page
Loading...
Need help?
General