EasyManua.ls Logo

COBHAM EXPLORER 8100 - Page 131

COBHAM EXPLORER 8100
192 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OpenAMIP setup for iDirect iNFINITI & Evolution
98-145510-E Appendix C: VSAT modem settings C-7
[FREQ_TRANS]
down_translation = 11300.000000
up_translation = 12800.000000
(BUC LO)
[GUI_SERVER_PROXY]
port = 14599
[LAN]
lan_gw_ip = 0.0.0.0
lan_ip = 10.1.6.1
lan_subnet_ip = 255.255.255.128
[MAPSERVER_0]
hostname = 172.28.1.11
port = 5003
[MOBILE]
gps_input = 2
(2 => GPS via OpenAMIP)
gps_validation_active = 1
init_tx_power_offset = 0.000000
is_mobile = 1
latlong_acq_interval = 300
latlong_fail_interval = 10
latlong_interval = 300
tx_handshake_enabled = 0
(BUC mute/unmute is handled by the VSAT terminal!)
[MODEM_INSTALLATION]
reflector_offset_angle = 0.000000
remote_lat = 35.890000
remote_long = 14.480000
spacecraft_long = 35.900000
[MODEM_PARAMETERS]
ref_carrier_fec_block_size = 100
ref_carrier_modcod_coding_rate = 2
ref_carrier_modcod_modulation = 1
ref_carrier_symbol_rate = 360000.000000
rx_acqrange = 100000
rx_diff = 0
rx_freq = 1263381999
rx_mode = 2
rx_only = 0
rx_scram = 1
rx_specinv = 0
rx_symrate = 2778000.000000
tx_bitrate = 1

Table of Contents

Other manuals for COBHAM EXPLORER 8100

Related product manuals