Chapter 3: Service & maintenance
Troubleshooting 15
33333
Service & maintenance
• OVERHEATING. System is overheated. System is halted in 30 seconds
• ERROR. A critical error is detected. See event list.
The latest version of this manual is available in PDF format via the HELP
menu. The manual will either be displayed immediately or it will be available
in the download folder (depending on the browser or mobile device used).
Troubleshooting
Introduction
In this section you find possible root causes to the experienced errors and
suggestions for a remedy. Listed are only errors that may be caused by
wrong installation, wrong configuration or misuse of the product. Errors
where no remedy is listed could indicate damaged equipment. If failing to
restore normal system status contact your service partner. The following
sources for system validation are available:
• Light indicators
• BITE events (warning sign)
Light indicators
The BDU terminal has several indicator LEDs. They indicate the overall
system status during normal use.
To Next Page
Loading...
Need help?
General
