Channel additions
HF SSB Transceiver 9323/9360/9390/9780 Technical Service Manual 6-7
Deleting a channel
You can delete a protected or unprotected channel if you have Option TxE. If you
have Option TxD you can only delete unprotected channels.
©
Unprotected channels are identified by a dot in the
Channel Protection field.
Selecting Channel mode
q If you are not in Channel mode, press Mode repeatedly until the display for
Channel mode appears.
Selecting a channel
q Select the channel you want to delete.
q Press F2(ENTER) twice to see the display for Enter Channel No.
Deleting the channel
q Press F1(DELETE) to see a display that is similar to the following.
The display asks you to confirm DELETE CHANNEL?
q Press F1(YES).
If you select a channel that is an emergency channel, the transceiver will
beep and show a message saying Is Emergency Channel. You will not
be able to delete the channel until it is removed from the preset emergency
channels.
If you do not want to delete the channel, press F2(NO).
The display returns to Channel mode.
To Next Page
Loading...
Need help?
General
