Code Blue IP2501-s - Page 38

Code Blue
•
259 Hedcor Street
•
Holland, MI 49423 USA
•
800.205.7186
•
www.codeblue.com
GU-137-Hpage 38 of 67
IP1500 and IP2500 Series
Administrator Guide
SCRIPTING BASIC CALL (continued)
• From the Select Actiondropdown,choosePlace Call.
• Bydefault,therstnumberplacedinmem-
orywillbepresenthere.Ifanothernumber
isdesired,usethedrop-downarrowto
locateandselectanotherphonenumber.
• Click on the Save Script button. This
completesthebasicprogrammingneeded
toplaceacall.
Other Basic Script Choices
Scriptinginthespeakerphoneallowsfornon-phonecallscriptingtobeprogrammedtomeetunique
needs of the customer.
1. Forexample,use“Button #1 Pressed”asseenintheexample“Basic Call”.
2. Instead of choosing “Place Call,” select “Control Aux Output”.
3. Bydefault,theAuxiliary1ispresented
 (butnoteonlythoseAuxOutputs
 selectedinHardwareSettingswillbe
 availableinthislist).
(Continued on next page)