27
CQube MF & LF
Disassemble and cleaning of coffee filter
CLEANING AND CARE
Loosen the outlet and insert the tool (A), through one of the holes in the front
of the brewing mechanism all the way to the rear part of the cylinder wall
(Figure 1), move the tool towards the rear section of the lter insert until the
insert is ejected (Figure 2).
Clean the lter insert with 25g cleaning agent dissolved in 3 dl water for max 10
minutes.
Re t the lter. Close the door.
Press the /
ENTER
button and the brewing mechanism will return
to default position.
Remove user card.
Cleaning agent: for brewing mechanism
Filter: for brewing mechanism
Tool: for disassembly of filter
A
10 minutes
25g
97 Celsius
Figure 2
Figure 1
3 dl water
Product No. 1104161
Product No. 47200213
Product No. 4720090
Is available from your dealer
Dispense a cup of coffee and discard it to remove cleaning
agent remains in the fi lter. After having been in contact with
the cleaning agent, the fi lter must be washed with detergent
and be carefully rinsed under running water.
Note
To Next Page
Loading...
