31
CQube MF & LF
MESSAGE SHOWN ON DISPLAY
Energy Saving Mode
Not Available
Heating Water
Please Wait...
Low Water Level
Press Enter Key
Filling Water
Please Wait...
Warning
Low Temperature
Low temperature
Blocked
Empty Drip Tray
Low Water
Level Blocked
Check
Water Supply
Empty Waste Box
Change Brewer Filter
Place Cup
Bev. Disabled
Door Open
Change
Water Filter
Message On Display
Indication
The machine is in energy saving mode.
Drink can not be selected as jug.
Low temperature in the water tank, the machine is heating up
(blocked).
Low water level in water tank. Press enter key to start filling up the
water tank.
The machine is filling water.
Temperature is low, It is still possible to dispense drink.
Temperature is low, the machine is blocked.
The drip tray is full of water.
The water level in the water tank is low, it is not possible to
dispense drink.
The water has not reached the correct level in the water tank,
check the water inlet hose, restart the machine.
The waste box is full, open the door and empty out the grounds.
When closing the door, press E to reset the counter. Selectable in
main program.
The brewing filter is clogged. The filter needs replacing or to be
cleaned.
If the cup sensor has been activated, this is shown if no cup has
been placed on the drip tray.
The drink has been disabled.
The door is open.
The water filter needs replacing, press the button E to reset the
counter.
To Next Page
Loading...
